From single-room renovations to large residential and commercial projects, we deliver clean, reliable plastering services backed by careful preparation, organised delivery and workmanship that speaks for itself.
Creating clean, ready-to-decorate interiors with minimal disruption and dependable communication throughout.
Reliable delivery across multiple plots and phased programmes where quality, programme awareness and clear communication matter.
Professional site teams capable of working within active commercial environments, offices, retail units and larger refurbishments.
A straightforward approach designed to keep projects moving smoothly from first enquiry through to completion.
Tell us about the project, the property and what stage you're at. A description, a few photos or a quick message is all we need to get started.
We review plans, drawings, room schedules or photographs and advise on the most suitable approach, materials and specification for your project.
A clear, itemised quotation outlining scope, expectations, programme assumptions and project requirements — no vague or open-ended pricing.
Works are planned around your programme requirements, site readiness and access so disruption is kept to a minimum throughout.
Clean, professional delivery with a smooth, paint-ready finish. We inspect the work, address any snags and hand over when everything meets the required standard.
Smooth, paint-ready finish over existing plaster, plasterboard and renovation rooms.
Plasterboard installation for new walls, extensions, partitions and refurbishments.
Seamless repairs to cracks, chases, holes and localised failed plaster.
Boarded and plastered feature walls with sharp edges and clean recesses.
Plot-by-plot plastering for developers and contractors with consistent standards.
Internal work often involves several linked stages. We can handle the preparation, boarding, patching, media wall work and final plaster finish as one joined-up scope, which keeps standards clearer and reduces the risk of gaps between trades.
We are not the cheapest option and we do not pretend to be. What we offer is a reliable standard of work, delivered by experienced site teams who take preparation seriously and communicate clearly throughout.
Every surface is assessed and prepared before a trowel goes on. Floor coverings protected, substrate checked, PVA applied where needed. The finish is only as good as what is underneath it.
We carry full public liability insurance on every project. Documentation available on request — no delays, no questions.
You receive a written quotation outlining scope, preparation, materials and exclusions. No verbal estimates, no surprises when the invoice arrives.
Our teams have worked across residential, development and commercial projects. We understand what different clients need from a plastering contractor and we deliver accordingly.
We respond promptly, keep clients updated and flag issues before they become problems. Reliable communication is not an extra — it is how we operate.
We work tidily and leave a clean site. Protection is put down before work starts and removed carefully at the end. This is a standard expectation, not a premium add-on.
“Great job skimming our room. The finish is clean, even and ready for paint. Would use again.”
“Used them during a house renovation and the plastering finish was really good. Reliable, tidy and easy to speak to.”
“We had a few damaged areas patched and skimmed. You would not know there had been a problem now. Very neat work.”
Answers to some of the questions we are asked most often before a project begins.
Plastering refers to applying base and finish coats of plaster to a bare wall or masonry surface. Skimming is a thin finish coat applied over existing plasterboard or sound old plaster to create a smooth surface ready for decorating. Both produce a flat, paintable finish ÔÇö the approach depends on what is already on the wall.
Fresh plaster typically feels dry to the touch within 24ÔÇô48 hours but is not ready to paint. Full drying takes around 4ÔÇô6 weeks depending on coat thickness, room temperature, ventilation and how absorbent the substrate is. Wait until the plaster has turned from a dark, patchy colour to a uniform pale shade before applying a mist coat.
On plasterboard we typically apply one or two thin skim coats of finish plaster. On masonry, brick or older walls we usually apply a bonding or browning undercoat first to build up and level the surface, followed by finish coats. The number of coats depends on how uneven the wall is and what condition it is in.
In most cases, yes. A PVA bonding agent is applied before plastering to control suction and help the plaster key to the surface. On highly absorbent walls, skipping this step causes the plaster to dry out too quickly, which leads to cracking and poor adhesion. We always prepare the substrate correctly before any plaster goes on.
Sometimes. If the existing plaster is sound, well bonded and in good condition, it can be skimmed over directly. If it is blown, cracking, damp damaged or unstable, it should be removed and the wall replastered from scratch. We assess the condition of existing plaster on site before recommending the most suitable approach.
Common signs include a hollow sound when the wall is tapped (known as blown plaster), visible cracks, paint that is bubbling or peeling repeatedly, persistent damp patches, or plaster that crumbles at the edges. If you are unsure, we can assess the walls on site and advise whether a patch repair, skim or full replaster is the right option.
Yes. Artex and textured coatings can be overplastered with a skim coat provided the surface is sound and properly prepared. If the artex was applied before 2000, it may contain low levels of chrysotile asbestos ÔÇö in that case we recommend a test before any work begins. We can advise on this as part of our site assessment.
A single room skim can usually be completed in one day. Larger jobs ÔÇö full replastering of multiple rooms, boarding out and skimming, or whole-property work ÔÇö will take longer depending on scope. We give a programme estimate as part of every written quotation so you know exactly what to expect before we start.
Clear the room as much as possible and move furniture away from the walls. Remove socket covers, switch plates and any loose wall fixings if you can. We protect floors and any furniture that cannot be moved with dust sheets as part of our standard preparation ÔÇö you do not need to do this yourself.
Both. We carry out patch repairs for localised damage ÔÇö damp repairs, holes left by chased cables, areas around removed fixings ÔÇö as well as full room and full property replastering. On patch work we always aim to match the surrounding finish as closely as possible, though a slight difference in level or texture is sometimes unavoidable on older walls.
Small hairline cracks are common and are usually caused by natural building movement or plaster drying too quickly. Larger or recurring cracks can indicate structural movement, thermal expansion, damp ingress or poorly bonded plaster. We assess the cause before recommending the correct repair, as filling a crack without addressing the underlying cause will not last.
Yes, but you need to allow the plaster to dry fully first. Apply a mist coat ÔÇö emulsion diluted with around 10ÔÇô20% water ÔÇö as your first coat. This seals the plaster gradually and prevents the topcoat from peeling. Applying full-strength paint to fresh plaster traps moisture and leads to flaking. Most plasterers recommend waiting at least four weeks before full decoration.
We deliver internal plastering services across Cheshire, Merseyside, North Wales and the surrounding region for homeowners, developers and commercial clients.
Not sure if we cover your area? Get in touch and we’ll confirm availability.